Experience reduced downtime and time-to-market with E-Val™ Pro Plus
Be confident in your compliance, ensure product safety, and optimise your pharmaceutical processes with Ellab’s Wired Validation Solution.
The E-Val Pro Plus wired validation solution is designed for validation applications in life science that require compliance with FDA guidelines and international GMP standards.
It’s ideal for Temperature Controlled Units (TCUs, CTUs) with an extreme temperature range or where real-time measurements are needed, like:
Ultra Low Temperature Areas
E.g. Liquid Nitrogen Containers for the cryopreservation of living cell material at -196 °C, or Freezers.
High Temperature Areas
E.g. Heat Tunnels / Dry Heat Sterilisation (for Depyrogenation – in the range of +180 to 300 °C).
Sterilization in Place
For SIPs at +121 °C, because you have a real-time measurement with a cycle rate of one second. Especially at initial qualifications where you can observe the measurement and react if something isn’t going as planned.
Autoclaves
For real time measurements in Steam Sterilisation Processes at 121 to 134 °C.
The E-Val Pro Plus module is equipped with 52 individual sensor inputs for thermocouples or analog/digital inputs – so you can take advantage of a wide temperature range and different measurement parameters.
The traceable and interchangeable thermocouples comprise of a smart USB connector with in-built cold junction compensation. Each connector maintains the calibration offsets reducing the pre and post calibration time and efforts, so nothing is lost if you need to change sensors.
Unlike most wired validation solutions, the E-Val™ Pro Plus can measure several parameters in addition to temperature. To do this, Ellab designed a Sensor Interface which can be fitted with various sensors, thereby covering all a wider range of measuring parameters.
Unlock measurements for:
Temperature
Pressure & Vacuum
Relative Humidity
CO2
Conductivity
