Simplify dissolution automation with the Distek 2500 Select Bathless Dissolution Tester in combination with the Distek Opt-Diss In-Situ Fibre Optic UV.
The Distek Opt-Diss 410 In-Situ Fibre-optic UV technology replaces traditional sampling methods to provide in-vessel dissolution measurements, multi-component analysis and complete dissolution profiles. All in the same time it takes to run the dissolution test!
When paired with the Distek 2500 Select Dissolution Tester, efficiency is improved even further as each vessel is individually heated and the vessel temperature is continuously monitored. In-vessel temperatures are displayed and recorded for each vessel. Heater jackets raise media temperatures from ambient to 37°C in less than 15 minutes, using considerably less energy than a water bath in the process and eliminating all maintenance associated with a traditional water bath.
The combination of the two provides an automated dissolution analysis. Fill the vessels with media, places doses in the tablet droppers and set up the method on the Distek Opt-Diss 410. The Distek 2500 Select will automatically introduce the doses and start the dissolution test when the defined vessel temperature is reached. The Distek Opt-Diss 410 will take UV absorbance readings in the vessels at the required sampling points throughout the dissolution test and build the dissolution profile in near real-time. At the end of the test the Distek 2500 Select with automatically stop heating and stirring. The dissolution data will be stored in a secure folder on the built-in PC within the Distek Opt-Diss 410. No sampling, no filtering, no flushing lines, no media replacement, lower energy consumption and no single-use plastic waste.
